Finally getting back to work on my 55

Finally getting back to work on my 55 after taking some time to help a friend out with another project. 

Just finished installing the Taillight Gas Filler Conversion Kit from Rocky Hinge. Installing the kit was the easy part. Filling the old gas door is another story. When I striped the paint around the door I found old body work from door to taillight area. Welded plate in door area and spent a few more hour’s heat shrinking the metal to get it to a point where I could apply a thin coat of body filler.

sanding 1sanding 2



Leave a comment

Please note, comments must be approved before they are published